Digital Switching by Raymarine brings all of the power and convenience of advanced home automation to your boat. Digital Switching allows you to control onboard electrical and electronic systems like lighting, air-conditioning, navigation lights, wipers, horns, entertainment systems, security systems and much more from your network-connected multifunction display, smartphone or tablet.
Digital Switching by Raymarine replaces the standard mechanical circuit breakers and switches with a state-of-the-art digital power distribution. This system not only offers convenience and ease-of-use, it also delivers on the promise of seamless, reliable operation as well as simple and cost effective installation.
Digital Switching by Raymarine brings all of the power and convenience of advanced home automation to your boat. Digital Switching allows you to control onboard electrical and electronic systems like lighting, air-conditioning, navigation lights, wipers, horns, entertainment systems, security systems and much more from your network-connected multifunction display, smartphone or tablet.
Digital Switching by Raymarine replaces the standard mechanical circuit breakers and switches with a state-of-the-art digital power distribution. This system not only offers convenience and ease-of-use, it also delivers on the promise of seamless, reliable operation as well as simple and cost effective installation.
Features
What is Digital Switching?
Digital Switching by Raymarine brings all of the power and convenience of advanced home automation to your boat. Digital Switching allows you to control onboard electrical and electronic systems like lighting, air-conditioning, navigation lights, wipers, horns, entertainment systems, security systems and much more from your network-connected multifunction display, smartphone or tablet.
Digital Switching by Raymarine replaces the standard mechanical circuit breakers and switches with a state-of-the-art digital power distribution. This system not only offers convenience and ease-of-use, it also delivers on the promise of seamless, reliable operation as well as simple and cost effective installation.
Graphical Interface
Assets for every type of circuit switch or monitor
Fully customisable screens. Assets may be dragged and dropped into any configuration.
Screens can be personalised by uploading boat images
Controllable Items
The diagram below shows a selection of the items you could control using Digital Switching.
Digital Switching: Elegant Simplicity
Instead of bulky and expensive switch panels, the Raymarine Digital Switching system uses rugged and compact Digital Circuit Control Modules (CCMs). Each CCM supports multiple circuits that are customised to meet the exact needs of the equipment being controlled.
Each CCM connects to the vessel’s existing NMEA2000 network backbone enabling it to communicate with the other CCMs and Multifunction Displays onboard. This flexible network architecture enables the CCMs to be mounted nearby to the equipment they are controlling. This significantly cuts down on the amount of cabling required to be installed onboard the vessel.
This benefits the boat builder and owner by creating a system that is simpler to install and troubleshoot than traditionally switched systems. Significant cost savings can easily be realised due to faster installation and reduced amount of cable required to wire the vessel’s systems.
In addition to wired controls, the Raymarine Digital Switching system also supports ENOcean wireless, energy harvesting switches and sensors. Completely freed from the constraints of wires, ENOcean wireless devices bring a whole new level of freedom and flexibility to yacht system design.
Control your environment and onboard technology using Raymarine aSeries, eS Series, gS Series Glass Bridge displays as well as cSeries and eSeries displays.
Mobile Devices
With Raymarine Control and Remote Apps, you can take control using a tablet or smartphone.
Control Units and Modules
The Master Control Unit is the central processor that drives the system, providing computing power, intelligence and decision making. In addition, there are various interfaces for connection to external devices and a remote control port.
The MCU is an NMEA2000 device that talks to the other system components via the NMEA2000 network. The MCU stores and executes configuration files for installation holding data for every DC Module and Membrane Panel present. Should a Module or Membrane need to be replaced, the MCU distributes data to the replacement once the base address of the new component has been entered.
The Circuit Control Module (CCM) is an NMEA2000 device that is connected to the main DC Bus and provides inputs and outputs to the system. With multiple input capabilities and ranges, the CCM is an extremely versatile and cost effective means to interface signals to the system and when combined with the powerful software, complex monitoring and control systems are easily realized.
Circuit Control Module (CCM) Details (CCM-016 through CCM-616)
Outputs
Configurable fuse setting up to 18A
High and low-side options for reversible function
Dimming function, including soft start/stop
Under-current circuit detection
Inputs
Configurable thresholds for alarms and/or graphical functions
Plus or minus sensing for digital
Analogue inputs for voltage (0-32V), current (4-20mA) or resistive
Multiplexed Channels
Up to 4 circuits may be multiplexed onto a single channel
Tank Monitoring
Calibration with set points
Window Wiper Functions:
High/low speed, interval etc…
NEW CCM-011 / CCM-011 CAN Circuit Control Module (CCM) Details
Outputs
20 Output Channels
Discrete 10A operation, parallel operation for increased capacity
Electronic over current protection (configurable)
Real time current feedback
Over and under current detection
Dimming
Soft start / Soft stop
Programmable Polarity Reversal (High Side & Low Side switching) on two channels
Inputs
11 inputs (CAN version has 7 inputs as 4 channels used for CAN / RS485)
Digital inputs with indication (50mA capability)
Multiplexed inputs – up to four switches per channel
High Side & Low side signal switching (50mA capability)
Dimmable 0 – 100 % (6ch)
Analogue Voltage Measurement (above supply voltage, max 32V) Resistance Measurement (0 – 1500 ohm)
Counter input with configurable thresholds level (2ch)
Multiplexed Channels
Up to 4 circuits may be multiplexed onto a single channel
Tank Monitoring
Calibration with set points
Window Wiper Functions:
High/low speed, interval etc…
Circuit Control Module (CCM) Channel Information
CCM-011
CCM-011 CAN
CCM-016
CCM-116
CCM-116W
CCM-216
CCM-216W
CCM-316
CCM-316W
CCM-416
CCM-416W
CCM-516
CCM-516W
CCM-616
Power
12V
12/24V
Digital Inputs
11
7
16
12
16
Analogue Inputs
11
7
16
12
16
Current Inputs
2
2
16
10A Outputs
20
16
12
8
12
18A Outputs
4
Dimmer Outputs
20
12
16
Inverted Outputs
4
4
8
Wiper Control Outputs
2
4
4
5
Common Ground
2
Wireless Inputs
30
30
30
30
30
Part Number
E70317
E70348
E70296
E70169
E70170
E70171
E70172
E70173
E70174
E70175
E70176
E70177
E70178
E70223
Master Control Unit (MCU) Details
The Master Control Unit (MCU) provides numerous benefits to the existing Circuit Control Modules (CCMs):
In larger systems, the MCU stores the full configuration and ensures effective communication between CCMs.
The MCU-200 adds GSM capabilities to the system. A dedicated SIM card slot allows the MCU-200 to connect to a mobile GSM network and communicate with a smartphone via text messaging.
The MCU-150 offers a dedicated CAN-bus link to third-party systems such as air conditioning, battery management etc.
Ordering Information
Digital Switching Ordering Information
Raymarine’s Digital Switching System is ideally suited for new build yachts as well as vessels undergoing major overhaul or refit.
If you would like to add Digital Switching to your vessel, speak with your boat builder / manufacturer who can advise you further.
Designing and Configuring a Raymarine Digital Switching System
Raymarine’s Digital Switching experts will work with the boat builder or shipyard to determine which inboard devices are suitable for Digital Switching Control, and where those items will be controlled from. A detailed list of equipment and their individual power requirements will be generated into a channel list that will be used to design the overall system.
Next, Raymarine’s experts will match that list of requirements and channels up to the best combination of specific CCMs and accessories.
Finally, the customized touchscreen user-interface will be designed and uploaded into the vessel’s Multifunction Display. CCMs, accessories and ENOcean components will then be rigorously tested to ensure the system is performing as-intended.
This process is demonstrated in the diagram below:
Related
Related Products
Configuring Digital Switching to your marine electronics network
Digital Switching is compatible with the following Raymarine multifunction displays. Please note that you must be running version 10 software or later. You can download the latest update here.
9″ to 15.4″ Glass Bridge touchscreen network displays
Software
Digital Switching Software
Digital Switching Systems are custom built and personalized to the individual’s vessel and requirements. All configuration will be completed by the boat builder or shipyard. Learn more here.
Users with a Digital Switching System in place should ensure that their networked Multifunction Displays are up to date with the latest LightHouse II software update.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
.jpg "Typical Digital Switching System | Raymarine")
Avaliações
Não há avaliações ainda.